Accessories

Arca Swiss Lever Clamp + Sand Sock Gear Bipod Adapter: Atlas

Our Atlas Bipod Adaptor paired with a Leofoto Arca Swiss Lever Clamp is exactly what you need to attach your bipod to your Arca Swiss Rail.  Adaptor is Black Hardcoat Anodized.  Hardware is included.

Works With -NC or -LW17 Atlas Bipods

What you get:

Leofoto Arca Swiss Lever Clamp

Sand Sock Gear Atlas Bipod Adaptor

Hardware 

$ 60.00 $ 70.00
Arca Swiss Lever Clamp + Sand Sock Gear Bipod Adapter: Evolution

Our Modular Evolution Evopod Adaptor paired with a Leofoto Arca Swiss Lever Clamp is exactly what you need to attach your bipod to your Arca Swiss Rail.  Adaptor is Black Hardcoat Anodized.  Hardware is included.

Works with Modular Evolution Evopod Bipods

What you get:

Leofoto Arca Swiss Lever Clamp

Sand Sock Gear Evolution Bipod Adaptor

Hardware 

$ 60.00 $ 75.00
Black Quiver .308 ,6.5CM, .243, .260, 6MM CM MLOK MOUNT
Quiver is a low profile .308 Spare Round Carrier. (also fits .243 6.5 Creedmoor up to 30-06) Much like the Side Saddle is to the Shotgun, Quiver is designed for the Precision Rifle, securely carrying 2 quickly accessible spare rounds. 
Machined from 6061-T6 Aluminum.
Type III Hard Anodized.
Weight 1.5 oz .
Black
100% Designed and made in the U.S.A.

$ 52.00
Bullet Box Complete System (3.70"Max OAL) - Magnum Cartridge

Foam.

The foam is made of a closed cell polyethylene foam similar to a “Pick N Pluck” style of foam. It has 50 holes to accommodate up to 50 rounds. This magnum (short) size case is designed to house cartridges as small as a standard round and as large as a magnum cartridge such as a 338 Lapua. The cases listed will take a round with an overall length of 3.7” (recommend closer to 3.3") on the short box with the thinner foam on the bottom and in the lid. 

Top Plate.

Made of 0.040" stainless steel or 0.120" leather, this top plate provides a grid to aide in organization and load development. It also will provide rigidity to the foam if one wants to use them as loading blocks and transfer then transfer ammunition to the box.

 

SKB Case.

Includes a black SKB 0907-4 I Series case.  This case is waterproof and dust tight with trigger relase latches and a rubber snap down handle.

Foam:

  • Length: 9.50"
  • Width: 7.375"
  • Thickness (Ammunition Foam): 2.00"
  • Thickness (Top and Bottom Pads): 0.50" and 1.00"

Plate:

  • Length: 9.165"
  • Width: 7.075"
  • Thickness: 0.040" Stainless -  0.120" Leather

Box:

  • Exeterior Lenght: 10.73"
  • Exterior Width: 9.69"
  • Exterior Height: 4.8"
  • Box Weight: 2.50 lb
  • Interior Length: 9.50"
  • Interior Width: 7.38"
  • Interior Height: 4.13
$ 90.00
Bullet Box Complete System - Standard

Bullet Box Complete System - Standard

Foam.

The foam is made of a closed cell polyethylene foam similar to a “Pick N Pluck” style of foam. It has 50 holes to accommodate up to 50 rounds. This standard size case is designed to house cartridges as small as a 223 and as large as a standard cartridges such as a 6.5 Creedmoor. The cases listed will take a round with an overall length of 3.5” with the thinner foam on the bottom and in the lid. For rounds such as the 223, use the two thinner pieces of foam on the bottom and the thicker piece on the lid.

 

Refer to Fitment Information for more details.

 

Top Plate.

Made of 0.040" Stainless steel, this top plate provides a grid to aide in organization and load development. It also will provide rigidity to the foam if one wants to use them as loading blocks and transfer then transfer ammunition to the box.

 

SKB Case.

The kit includes a black SKB 0806-3 I Series case.  This case is waterproof and dust tight with trigger relase latches and a rubber snap down handle. 

Foam:

  • Length: 8.50"
  • Width: 6.00"
  • Thickness (Ammunition Foam): 1.25"
  • Thickness (Top and Bottom Pads): 0.375" and .625"

Plate:

  • Length: 8.275"
  • Width: 5.775"
  • Thickness: 0.040"

Box:

  • Exterior Length: 9.41"
  • Exterior Width: 7.82"
  • Exterior Height: 4.35"
  • Box Weight: 1.65 lb
  • Interior Length: 8.50"
  • Interior Width: 6.00"
  • Interior Height: 3.75
 
$ 69.99
Catalyst Arms Hammerhead Bolt Knob

Catalyst Arms oversized solid aluminum knob is designed to provide a secure grip on the bolt handle in any and all conditions. Features a contoured "waist" for pushing bolt knob up with your trigger finger.

FITS BOLT HANDLES WITH 5/16-24 TPI

  • Ruger Precision Rifle (Gen I, II, III, & Magnum)

  • Ruger Precision Rimfire

EASY INSTALLATION

WEIGHT: 1.5 oz

DIMENSIONS: 1"x1"x2"

MADE IN THE U.S.A.

$ 34.95
Fix It Sticks All In One Torque Driver Kit W/Ratchet T- Way Wrench

 

FIX IT STICKS ALL-IN-ONE TORQUE DRIVER KIT W RATCHET HANDLE

Featuring the FIX IT STICKS ALL-IN-ONE TORQUE DRIVER KIT.  Tighten down your scope rings, mounts, actions screws, etc. while in the field, at the range, or at home.  No more over or under tightening your critical components.  Lightweight and compact - the All-in-One Torque Driver Kit will always be there when you need it.


Kit includes:

  • All-in-One Torque Driver (15 - 65 inch lbs)
  • T-Way Ratchet Handle
  • 15 different bits
  • 1/2" Socket and 1/4" bit adapter set
  • Zippered case with Molded Holder

Please note that the All-in-One Driver operates differently than the normal Fix It Sticks Torque Limiters.

$ 140.00
FIX IT STICKS ALL-IN-ONE TORQUE DRIVER KIT

 

FIX IT STICKS ALL-IN-ONE TORQUE DRIVER KIT

Featuring the FIX IT STICKS ALL-IN-ONE TORQUE DRIVER KIT.  Tighten down your scope rings, mounts, actions screws, etc. while in the field, at the range, or at home.  No more over or under tightening your critical components.  Lightweight and compact - the All-in-One Torque Driver Kit will always be there when you need it.


Kit includes:

  • All-in-One Torque Driver (15 - 65 inch lbs)
  • T-Way T-Handle Wrench
  • 15 different bits
  • 1/2" Socket and 1/4" bit adapter set
  • Zippered case with Molded Holder

Please note that the All-in-One Driver operates differently than the normal Fix It Sticks Torque Limiters.

$ 112.00
Fix It Sticks Bench Top Kit (Special Order)

The Fix It Sticks Bench Top Kit is the perfect kit to leave in your reloading/gun room, service department etc

Kit comes with:

Contains
14 Torque Limiters (6, 10, 15, 20, 25, 30, 35, 40, 45, 49, 55, 60, 65, 80 Inch lbs)
T-Handle Drive
Milled Aluminum Bench Top Holder

This is a special order item and will be ordered in

$ 480.00 $ 540.00
Fix it Sticks Deluxe Kit - Fix It Stick

Fix It Sticks Field Maintenance Kit with Pouch

Kit includes:

  • 65 Inch Lbs miniature torque limiter
  • 45 Inch Lbs miniature torque limiter
  • 25 Inch Lbs miniature torque limiter
  • 15 Inch Lbs miniature torque limiter
  • Set of Replaceable Fix It Sticks
  • 16 different bits
  • 1/2" Socket and 1/4" bit adapter set
  • Tactical Tailor Designed Pouch

Details: Fix It Stick

$ 165.00
Fix It Sticks Deluxe Kit W/T-Handle

Fix It Sticks Field Maintenance Kit with Deluxe Case

Kit includes:

  • 65 Inch Lbs miniature torque limiter
  • 45 Inch Lbs miniature torque limiter
  • 25 Inch Lbs miniature torque limiter
  • 15 Inch Lbs miniature torque limiter
  • T-Way T-Handle Wrench
  • 16 different bits
  • 1/2" Socket and 1/4" bit adapter set
  • Deluxe Zippered pouch
$ 165.00
FIX IT STICKS RATCHETING T-WAY WRENCH

Fix It Sticks T-Way Wrench with a ratcheting feature added.

The Ratcheting T-Way Wrench has magnetic holders on all three ends that accept any standard 1/4" bit.  Reversible ratchet allows for quick tightening / loosening, even with limited clearance. 

The Ratcheting T-Way Wrench is a home / shop / auto tool that allows you to build bikes, furniture, motorcycles, etc.

 

$ 40.00

Top